5.5hp petrol, 8.6 l/m flow, 2200 psi. 5m hose. Engine 0.6L--#SAE15W-40 Water Pump Oil 75ml SAE75W-90 requested hose connection of 1/2 inch bsp can be 3/4 bsp
1. Engine oil level should be checked by placing the dip stick against the crank case threads, not screwing it down and then removing and reading. Always replace dip stick before starting engine. Low engine oil level will result in the engine cutting out.
2. Before running the washer the water pump transport bung on top of the pump should be removed, and replaced by red breather plug and black breather plug cap. If this is not done the pressure build up will force out the sight glass causing critical failure of the pump. This will invalidate the warranty.
3. The pressure washer should always be connected to a pressured mains water supply. Not a pond or gravity fed tank, critical failure of the water pump will occur if this is not done and will invalidate the warranty.