After the Changes in BE regulations we have altered our range to suit, but also trying to make sure that your existing range of products will still "Fit" the New poles.
The New pole has at the top the same adapter (A) as when we first launched the range (which has no sharp points), however at the bottom of the pole there is a smooth cap (B). When fixing this to the pole we advise using 1 or 2 of our pole retainers - so that If this pole is impacted it will pop off the fence without damaging the horse/rider/spectator.
We are offering 4 different lengths for this Pole - Mainly due to the enforce change to our Flag design and the need to sleeve the flag over the pole, as such 250mm has been lost on the overall height of the pole and flag - for instance if you require for your course 10 extra poles and you already have our 1.5m event/uni poles and our old style flags then to match the heights up, we would suggest taking the 1.75m poles and using the New Flags then the overall height of the Poles will be the same.
Specification:- Through the cross section these poles measure 35mm by 35mm with a 10mm radius on the corner. Made from a UPVC material they are designed if sufficient force is placed on them to buckle.
|Colour||Height of Pole||Dimensions (mm)||Weight|
|White||1.75m||2040mm (L) x 35mm (W) x 35mm (D)||0.626 kg|
These are the best poles to fix on to cross country jumps. There are no spikes at the end of these poles and are attached to the cross country jumps with the green retainer clip.Complies with Eventing safety standards.